Id-tech Spectrum IIa Manuel d'utilisateur

Full InsertMagnetic Stripe Readerand/orSmart Card Reader-WriterTTLSPECTRUM IIaUser’s Manual80059503-002Rev. C R04/06#456™

Appendix B MAGNETIC OUTPUT SIGNAL DESCRIPTIONS AND TIMING DIAGRAMMagnetic Stripe Reader/Smart Card ReaderDATAx (DATA TRACK LEVEL SIGNAL): The level of

8SW (CARD SEATED SIGNAL Pin 10) : Its normal level is HIGH. When the card is fully inserted (seated), the SW signal goes LOW to indicate that all eigh

9Rear View of I/O Connector* Indicates active low signalM = Magnetic only signalsIC = Smart card only signals Notes:• Prefi x “IC-” for the signal f

Warning This equipment has not been tested to comply with Part 15 of the FCC Rules for a digital device. This device is designed to be incorporated in

Table of Contents Description 1Specifi cations 2 Installation 4Operation 4Optional features 5 Appendix A. Ou

DESCRIPTIONThe ID TECH TTL Hybrid Insert Reader can be confi gured to read 1, 2, or 3 tracks of magnetic stripe data from cards conforming to ISO 7810

SPECIFICATIONSMAGNETICS PERFORMANCE CHARACTRISTICS Media speed: The circuit decodes data reliably at 3 to 50 inches per second (ips).Card Jitter: The

3ENVIRONMENTALOperating Temperature: -5°F to 158°F (-20°C to 70°C). Latch units: 32°F to 131°F (0°C to 55°C)Storage Temperature: -40°F to 158°F (-40

INSTALLATIONThe ID TECH Hybrid Insert Reader with the standard or metal bezel can be mounted via the front mounting fl anges. Side mounting studs are a

OPTIONAL FEATURES“Gate” OperationA spring-loaded gate protects the bezel opening from dust, dirt, and the insertion of foreign objects, but easily ope

6Appendix A OUTLINE DRAWING OF READER